• Item Name: LED T8 TUBE

• Item No.: AH-T8-10W1202D

• Power Consumption: 10W

• LED Chip Brand: EPISTAR

• Typical Color Temperature: 3000K/ 4000K/ 6000K

• Typical Lamp Luminous Flux :3000K：900Lm/ 4000K：1000Lm/ 6000K：1000Lm

• CRI :3000K：Ra>80/ 4000K：Ra>80/ 6000K：Ra>80

• Beam Angle: 130°

• Input Voltage:AC110V/60Hz AC220V/50Hz

• IP Code: IP40

• Operating Temperature : （-20℃~+40℃）

• Operating Environment:10%~90%RH

• Base: G13

• Life Time: 30,000Hrs

• Replacement: Substitute for 18w traditional T8 Fluorescent lamp

• PC lens with high light transmittance

• No screws design and un-disassembled, beam angle 240°

• Excellent performance replace traditional T8 fluorescent lamp

• Test reports and IES file available

• Diverse models available to meet your different demands

• Patented heat management and power supply solution technology

• Even color and non-glare beams, most fluorescent-like LED tube

• Stable performance with external power supply

• Good performance and of competitive price

• No UV or IR light radiation, comfortable, no noise, no mercury or other toxic materials used

• Without remove the ballast, replace the traditional T85tube directly

• This LED tube conforms to international safety certificates and patents like CE, RoHS

• Integrated heat sink design, with PCB board on heat sink aluminum, greatly improving heat dissipation.

• Light attenuation of SMD LED is less than 25% by 30,000 hours aging test under temperature of 50 degree

• LED driverr is designed by our own professional engineers, and we have good control of the quality, its highly efficiency and long lasting driver enable the tube low power consumption and longer lifespan

• CE,RoHS, TUV,GMC approval, Long warranty time: 2-3years

• 2 years warranty

• Good quality, competitive price.

• Environmental Protection

I. New installation
1. Make sure the power is cut off, connecting the LED T8 tube fixture and power switch into circuit.
2. Unpacking the AWARD^? LED T8 tube and install into the T8 tube fixture, check the wiring connections. Please note that it is no need to distinguish the positive and negative poles when install the AWARD^?  LED T8 tube into the fixture.
3. Confirm connecting then electrify to test function.
 
II. Replacement installation
1. Please make sure your T8 tube fixture is in electronic rectifier circuit or inductive rectifier circuit(Including the starter). If in inductive rectifier circuits T8 tube fixture, then can completely replace the traditional fluorescent tubes without remove the inductive rectifier and the starter.
2. In order to improve the efficiency of power consumption and achieved better performance. It is recommended to transform the circuit by professional and technical personnel.
3. To continue the step 2 and step 3 as described in the new installation.
 

• Commerical and residential lighting: ideal for office,conference,rooms,supermarket,restaurant,school, library, hospital, living room, parking lots, etc.

• Ideal for a variety of applications

• Ideal for common offices and facilities

• High light intensity, ideal for shops and factories with high ceilings

• Low power consumption, ideal for parking and warehouses

• Ideal for a variety of applications

• Ideal for common offices and facilities

• High light intensity, ideal for shops and factories with high ceilings

• Low power consumption, ideal for parking and warehouses